|
|
[code:1:9d95cfa08c]
我们手里拿到一块网卡,首先应知道它是什么型号的,看一下是否带有为OpenServer5.0.x的驱动程序.如果没有可以找销售商咨询一下,或上网查询一下.当取得了网卡的驱动后(网卡驱动一般是以Media Images的形式发布的).
以rtl8139为例.(设置简单,百兆网卡,价格便宜)
将rtl8139的Media Images文件拷贝到/下并改名为VOL.000.000
用custom安装网卡驱动程序
进入安装，然后在菜单中依次选择：
software->install new...->From scosysv(本地主机)->media Images
选择/目录回车，系统自动安装。
网卡驱动安装后进行网络配置
#netconfig
出现类似下边画面.
+----------------------- Network Configuration Manager -----------------------+
|+---------------------------------------------------------------------------+|
|| Hardware Protocol Help ||
|+---------------------------------------------------------------------------+|
|Current networking configuration: |
|+---------------------------------------------------------------------------+|
||*HW SCO TCP/IP Loopback driver ||
|| SCO TCP/IP ||
|| - SCO NFS Runtime System ||
|| ||
|| ||
|| ||
|| ||
|| ||
|| ||
|| ||
|| ||
|| ||
|| ||
|| ||
|+---------------------------------------------------------------------------+|
|----------------------------------------------------------------------------+|
|Add, Remove, or Modify a network adapter or serial link |
+-----------------------------------------------------------------------------+
在netconfig程序中选择： Hardware->add new Lan adapter(硬件->增加局域网网卡)
显示如下
+----------------------------= Add new LAN adapter --------------------------+
|Select network adapter to be added: |
|+---------------------------------------------------------------------------+
|| HP J2970A 10TP/TL PCI Adapter |
|| HP J2973A 10TP PCI Adapter |
|| IBM Auto 16/4 Token-Ring Network ISA-16 (Shared RAM) |
|| IBM Auto LANStreamer PCI Adapter Driver v2.5.0e |
|| IBM LAN Adapter for Ethernet (NE2000 Compatible) |
|| IBM PCI Ethernet Adapter |
|| IBM PCI Token-Ring Adapter |
|| IBM Token-Ring Network ISA Series (Shared RAM) |
|| Intel EtherExpress 16 ISA *
|| Intel EtherExpress PRO/10 LAN Adapter *
|| Intel EtherExpress PRO/100 LAN Adapter *
|| Intel EtherExpress PRO/100B / PRO/100+ LAN Adapter *
|| NSC NE2000plus InfoMover *
|| Novell NE2000 |
|| Novell NE2100 Compatible |
||* RTL8139 PCI Fast Ethernet Adapter |
|+---------------------------------------------------------------------------+
+----------------------------------------------------------------------------+
|[ Continue ] [ Cancel ] [ Help ]|
+----------------------------------------------------------------------------+
+----------------------------------------------------------------------------+
在这一步选择RTL8139 PCI Fast Ethernet Adapter项
然后依次选择： ->hardware->modify hardware configuration进行配置。
显示如下.
+--------------- Network Driver Configuration ---------------++
| ||
|Enter the configuration of RTL8139 PCI Fast Ethernet Adapter||
| ||
|Set speed and duplex mode:: | HardwareDefault______|v ||
| ||
| '*' - indicates conflict with other hardware ||
|------------------------------------------------------------+|
|[ OK ] [ Cancel ] [ Help ]||
+------------------------------------------------------------++
+------------------------------------------------------------++
选则OK取默认设置就可. 出现选择网络协议的画面.
+-----------------------------MM Add new LAN adaer ----------------------------+
|| Select network adapter to be added: --------------------------------|
++----------------------------------------------------------------------------|
||-----------------------------MM Add protocol --------------------------------|
|Select one networking product to be added to |
|RTL8139 PCI Fast Ethernet Adapter: |
||---------------------------------------------------------------------------++
|| HW RTL8139 PCI Fast Ethernet Adapter ||
||* - SCO IPX/SPX ||
|| - SCO TCP/IP ||
|| ||
|| ||
++---------------------------------------------------------------------------+|
|----------------------------------------------------------------------------+|
|[ Add ] [ Cancel ] [ Help ]|
+-----------------------------------------------------------------------------+
+-----------------------------------------------------------------------------+
| * RTL8139 PCI Fast Ethernet Adapter |
+-----------------------------------------------------------------------------+
+-----------------------------------------------------------------------------+
|[ Continue ] [ Cancel ] [ Help ]
+------------------------------------------------------------------------------
+------------------------------------------------------------------------------
选取- SCO TCP/IP 并增加,下边出现SCO TCP/IP的配置画面.
+--------------- SCO TCP/IP Configuration ----------------++
| ||
| ||
| Local Host Name: |scosysv_____________| [ Advanced ]||
| IP Address: |____________________| Options... ||
| Netmask: |____________________| ||
|Broadcast Address: |____________________| ||
| Domain Name: |____________________| ||
| TCP connections: |1024________________| ||
| Pseudo ttys: |64__________________| ||
| ||
|---------------------------------------------------------||
|[ OK ] [ Cancel ] [ Help ]||
+---------------------------------------------------------++
+----------------------------------------------------------+
填入TCP/IP的信息.
Local Host Name: hly (本地主机名)
IP Address: 192.168.0.33 (IP地址)(注一般局域网的IP网段为192.168.0)
Netmask: 255.255.255.0 (子网掩码,C类网为255.255.255.0)
Broadcast Address:192.168.0.255 (广播地址)
Domain Name: (域名,自行给定,也可不输)
TCP connections:1024 (TCP连接数目,默认设置就可)
Pseudo ttys:64 (伪终端数目)
配置结束重链内核.重起生效.
在系统起动时可看到网卡信息.
ethernet 0xe400-0xe41f 11 - type=2, addr=00:e0:4c:e||e6:7c
接下来就可以用ping 命令测试网卡是否正确安装.
ping(发送网间控制报文协议请求包到网络主机)
# ping 192.168.0.33(或ping hly)
显示
PING 192.168.0.33 (192.168.0.33): 56 data bytes
64 bytes from hly (192.168.0.33): icmp_seq=0 ttl=64 time=0 ms
64 bytes from hly (192.168.0.33): icmp_seq=1 ttl=64 time=0 ms
64 bytes from hly (192.168.0.33): icmp_seq=2 ttl=64 time=0 ms
64 bytes from hly (192.168.0.33): icmp_seq=3 ttl=64 time=0 ms
64 bytes from hly (192.168.0.33): icmp_seq=4 ttl=64 time=0 ms
64 bytes from hly (192.168.0.33): icmp_seq=5 ttl=64 time=0 ms
*
--- 192.168.0.33 ping statistics ---
6 packets transmitted, 6 packets received, 0% packet loss
round-trip min/avg/max = 0/0/0 ms
按del终止ping命令,ping汇报测试情况,上边说明6个测试包传输完毕.6个包接收,无包丢失.
round-trip min/avg/max = 0/0/0 ms 为测试包的收发的最小/平均/最大速度(以ms为单位)
一切都正常,就可以在配置一台计算机,进行网络应用了.
[/code:1:9d95cfa08c]
| ccb-llw 回复于：2004-03-08 11:05:49
| [quote:5bd875a132="sdccf"][/quote:5bd875a132]
| | sdccf 回复于：2004-03-08 11:06:37
| ？？？
| | gbthinker 回复于：2004-03-09 14:15:30
| 请问sco下网卡的默认名是net1吗？
他的命名跟什么有关系，只有一个
网卡和按两个网卡。他们的名（dev/）
的名字分别默认是什么？很着急，希望您
能告诉我！
| |
|
